The projector PG F262X by Sharp operates as a BrilliantColor-DLP device with 2600 ANSI lumens, a XGA 1024 x 768 resolution and a contrast of 2200:1. According to Sharp, the included lamp lasts up to 2000 hours. A look at the light output reveals: The 2600 ANSI lumens are sufficient to illuminate an image width of up to 444 cm in darkened rooms. If room light is present, we recommend not exceeding a maximum width of 296 cm. In terms of video signals, the device processes resolutions up to Full HD 1080P. Since entering the market in 2008, production has been discontinued; the manufacturer no longer actively offers the model.
Display Type
1 x 0,55" DLP Chip XGA 4/3 Ti Digital Light Processing Chip
Ansi-Lumen
Projector
2600
Screen
867 Lux (200 cm Screen width)
Contrast
2200:1 full on/off
2200:1 full on/off
Black Level
1,1818 min. Lumen
0,395 min. Lumen
Offset
54% 6 cm over screen top edge →
SCREEN
+Projector
Resolution
XGA 1024 x 768
786.432 Pixel UXGA 1600 x 1200 compressed
Standard-Portabel | External training and company presentations, as well as product presentations. Medium screen width or rooms with little light, max. 100 lumens.
I‘ve only had the projector for a short time, but I‘m completely satisfied with it. Even though it is classified as a data/presentation projector, I use it as a home cinema device.
I compared the Epson TW700, Panasonic AX200, Planar and the Sharp in the store. The Planar was quickly out of the running in terms of price, and the other three are roughly in the same price range. The Epson and Sharp were about equally loud. The Sharp‘s picture was very convincing in comparison. Rich blacks and, despite poorer specifications, in my opinion the sharper picture in all comparison modes, which were:
- PS 3 Forza Motorsport or similar via HDMII/DVI
- PS 3 BlueRay Casino Royale HDMI/DVI
- PS 3 DVD via Componente