The hardware properties of the XG P10XE manufactured by Sharp include 3000 ANSI lumens, a XGA 1024 x 768 resolution and a contrast value of 250:1. In operating mode, the installed projector lamp offers a lifespan of 1000 hours. For maximum setup flexibility, the model supports optional interchangeable lenses, meaning the optics can be precisely matched to individual on-site requirements. Suitable distances can be determined using the Projector Calculator. A look at the light output reveals: The 3000 ANSI lumens are sufficient to illuminate an image width of up to 477 cm in darkened rooms. If room light is present, we recommend not exceeding a maximum width of 318 cm. Since entering the market in 2000, production has been discontinued; the manufacturer no longer actively offers the model.
Stationary | Permanent installation in the training room and meeting room as well as the conference room. Medium screen width or rooms with a little more ambient light, max. 200 lumens.
Inputs
Video x 1 (RCA)
S-Video x 1
Audio L/R stereo x 1 (RCA).
Computer RGB x 2 (15 pin mini D-sub x 2, 5-BNC x 1).
Computer audio L/R x 2 (3.5mm stereo mini jack).
Component x 1 (BNC)
RS232C serial port x 1 (9 pin D-sub)
Wired Fernbedienung x 1 (3.5mm mini jack). Outputs
Computer RGB x 1 (15 pin mini D-sub).
Audio L/R x 1 (3.5mm mini jack).
Very robust, good video image without noticeable artifacts etc.
These things are pretty robust. I have two of them in permanent use, they never break. This also seems to be well known, because you can still get a good price for used boxes. It‘s just a real Sharp. You can tell that these guys have the longest experience in LCD projector construction. At least when the projector has to run a lot, or even under tough operating conditions, it is absolutely reliable. I also had a Benq + 1 x Optoma cucumber for a while. Unfortunately, they were defective relatively quickly:-((. Hence my choice of sharp...