The projector PX3 by 3M operates as a DLP device with 1000 ANSI lumens, a XGA 1024 x 768 resolution and a contrast of 2000:1. The manufacturer specifies a runtime of 2000 hours for this projector's lamp. Looking at practical performance, up to 275 cm can be illuminated with 1000 ANSI lumens in dark environments. Once daylight is in the room, the image should ideally be no wider than 183 cm. The projector was released in 2004 and is officially no longer distributed by 3M. Important maintenance note: It is no longer possible to procure replacement lamps for this model.
Display Type
1 x 0,7" DLP Chip XGA 4/3 Ti Digital Light Processing Chip
Ansi-Lumen
Projector
1000 / 800 im Eco Mode
Screen
333 Lux (200 cm Screen width)
Contrast
2000:1 full on/off
2000:1 full on/off
Black Level
0,5000 min. Lumen
0,167 min. Lumen
Offset
67% 26 cm over screen top edge →
SCREEN
+Projector
Resolution
XGA 1024 x 768
786.432 Pixel
UXGA 1600 x 1200 compressed
Video Modes
PAL, PAL-M, PAL-N, PAL-60, SECAM, NTSC, EDTV
Application
Micro-Portabel | Small mobile presentations. Small screen width, rooms with very little ambient light below 50 lumens.