Designed for the Stationary sector, the LU9750 model from Benq features 8500 ANSI lumens, a native WUXGA 1920 x 1200 resolution and a contrast ratio of 3000000:1. The manufacturer lists the lifespan for this model at 20000 hours, which translates to 13.7 years with 4 hours of daily use. For distortion-free image alignment, the projector offers both a lens shift function and keystone correction, granting significant leeway during mounting. A major advantage for professional installations is the ability to use interchangeable lenses, allowing the projector to adapt to highly varied projection distances. Which optic is required for a specific case can easily be calculated via the Distance Calculator. Regarding projection size, the value of 8500 ANSI lumens allows for an image width of up to 937 cm in darkened environments. In rooms with ambient light, the image width should be correspondingly reduced to a maximum of 625 cm. Regarding signal processing, the model is compatible with incoming 1080P content and 4K as well as 3D, meaning standard Blu-ray formats are processed effortlessly. The model is perfectly equipped for complex installations: In addition to the RJ45 jack for network administration, an HDBaseT port is available, transporting high-resolution AV signals over a single Cat cable. The projector was released in 2022 and is officially no longer distributed by Benq.
Display Type
1 x 0,67" DC3 DLPDMD Chip WUXGA 16/9 Ti Digital Light Processing Chip
Stationary | Permanent installation in the training room and meeting room as well as the conference room. Very large screen width and rooms with plenty of light and shaded daylight.
The screen width should be larger. It's uncomfortably bright in the dark. too bright
308 - 386 cm
Lux:
3778 Lux
Contrast:
3000000:1
Candela pro m²:
1203 cd/m²
Foot-Lamberts:
351 fL
62 cm
•
Focus
Powered
Zoom
Powered 1,25
Objective
Throw Ratio
optional
Audio
-
Connections
2x HDMI (HDCP 2.2)
1x DVI-D in
1x D-sub 15pin in und out
1x Cinch Video in
1x Cinch Stereo in
1x 3D Sync out
1x Mini Jack Audio in und out
1x Wired Remote out und in
1x USB-B (service)
1x USB-A(5V/2A)
1x RS232C Din 9 pin in und out
1x RJ45 in
1x HDBaseT