The basic data of the Barco F70-4K4 includes 4000 ANSI lumens, a resolution of WQXGA 2560 x 1600 as well as a contrast of 1800:1. The laser technology ensures a specified light source lifespan of up to 60000 hours – calculating to 41.1 years at four hours of use per day. The specifications indicate lens shift optics, allowing the image to be physically shifted without introducing digital image artifacts. A major advantage for professional installations is the ability to use interchangeable lenses, allowing the projector to adapt to highly varied projection distances. Which optic is required for a specific case can easily be calculated via the Projection Calculator. A look at the light output reveals: The 4000 ANSI lumens are sufficient to illuminate an image width of up to 551 cm in darkened rooms. If room light is present, we recommend not exceeding a maximum width of 367 cm. For media input, video signals up to 1080P as well as 3D are supported. An additional 360° projection capability allows the device to be oriented at almost any angle. Connectivity for fixed installations is rounded off by an RJ45 port for remote maintenance and an HDBaseT interface, which transmits bundled video, audio, and control data over long cable runs.
Display Type
1 x DLP Chip WQXGA 4/3 Ti Digital Light Processing Chip
Stationary | Permanent installation in the training room and meeting room as well as the conference room. Wide screen width or rooms with plenty of light (over 200 lumens).