Designed for the Stationary sector, the FL40-4K MKII model from Barco features 2600 ANSI lumens, a native WQXGA 2560 x 1600 resolution and a contrast ratio of 6000:1. Barco lists a runtime of 50000 hours for the LED in this projector. With four hours of daily operation, this corresponds to a period of 34.2 years. A major advantage for professional installations is the ability to use interchangeable lenses, allowing the projector to adapt to highly varied projection distances. Which optic is required for a specific case can easily be calculated via the Distance Calculator. A look at the light output reveals: The 2600 ANSI lumens are sufficient to illuminate an image width of up to 444 cm in darkened rooms. If room light is present, we recommend not exceeding a maximum width of 296 cm. Regarding signal processing, the model is compatible with incoming 1080P content and 4K as well as 3D. An additional 360° projection capability allows the device to be oriented at almost any angle. Connectivity for fixed installations is rounded off by an RJ45 port for remote maintenance and an HDBaseT interface, which transmits bundled video, audio, and control data over long cable runs.
Display Type
1 x DLP Chip WQXGA 4/3 Ti Digital Light Processing Chip
Ansi-Lumen
Projector
2600 / 2200 im REC.709 Mode
Screen
867 Lux (200 cm Screen width)
Contrast
1800-6000:1
1800-6000:1
Black Level
1,4444 min. Lumen
0,482 min. Lumen
Offset
-
Resolution
WQXGA 2560 x 1600
4.096.000 Pixel UHD (4K2K+) 3840 x 2400 compressed
Stationary | Permanent installation in the training room and meeting room as well as the conference room. Medium screen width or rooms with little light, max. 100 lumens.