According to Barco, the ID R600+ model provides 6000 ANSI lumens, a contrast ratio of 2000:1 alongside a SXGA+ 1400 x 1050 resolution. In operating mode, the installed projector lamp offers a lifespan of 1500 hours. The specifications indicate lens shift optics, allowing the image to be physically shifted without introducing digital image artifacts. A major advantage for professional installations is the ability to use interchangeable lenses, allowing the projector to adapt to highly varied projection distances. Which optic is required for a specific case can easily be calculated via the Distance Calculator. A look at the light output reveals: The 6000 ANSI lumens are sufficient to illuminate an image width of up to 675 cm in darkened rooms. If room light is present, we recommend not exceeding a maximum width of 450 cm. Should very large projection surfaces be required, the integrated edge-blending software offers the possibility to seamlessly combine images from multiple projectors without visible seams. The projector was released in 2006 and is officially no longer distributed by Barco.
Display Type
1 x 0,95" DC3 DLP Chip SXGA 4/3 Ti Digital Light Processing Chip
Ansi-Lumen
Projector
6000
Screen
2000 Lux (200 cm Screen width)
Contrast
2000:1 full on/off
2000:1 full on/off
Black Level
3,0000 min. Lumen
1,002 min. Lumen
Offset
0,0% 75 cm under screen top edge →
SCREEN
+Projector
Resolution
SXGA+ 1400 x 1050
1.470.000 Pixel UXGA 1600 x 1200 compressed
Stationary | Permanent installation in the training room and meeting room as well as the conference room. Very large screen width and rooms with plenty of light and shaded daylight.
Freeze Gamma correction Edge Blending Picture-in-Picture Password protection BrilliantColor™ Remote control with backlight Laut dem Exel Kalkulator stimmen die Shiftwerte im Prospekt nicht.
Freeze
Barco Website
Product Sheet english
