The Optoma ZH450 is a 3D-DLP projector that brings 4500 ANSI lumens, a HDTV 1920 x 1080 resolution alongside a contrast of 300000:1. Using this laser phosphor technology, the light source runtime is rated at 30000 hours, covering an estimated 20.5 years based on a 4-hour daily runtime. For basic image adjustment, the device is equipped with horizontal and vertical keystone correction, allowing digital compensation for trapezoidal distortion at angled projection setups. A look at the light output reveals: The 4500 ANSI lumens are sufficient to illuminate an image width of up to 682 cm in darkened rooms. If room light is present, we recommend not exceeding a maximum width of 455 cm. Regarding signal processing, the model is compatible with incoming 1080P content and 4K as well as 3D. Furthermore, the model supports 360° projections for highly flexible deployment scenarios. For convenient remote monitoring and administration, the projector is equipped with a classic RJ45 network socket.
Display Type
1 x DLP Chip HDTV 16/9 Ti Digital Light Processing Chip
Ansi-Lumen
Projector
4500
Screen
2000 Lux (200 cm Screen width)
Contrast
300000:1 full on/off
300000:1 full on/off
Black Level
0,0150 min. Lumen
0,007 min. Lumen
Offset
66% 18 cm over screen top edge →
SCREEN
+Projector
Resolution
HDTV 1920 x 1080
2.073.600 Pixel UHD (4K2K) 3840 x 2160 compressed
Standard-Portabel | External training and company presentations, as well as product presentations. Wide screen width or rooms with plenty of light (over 200 lumens).